Hydrostatic Level Probe SGE-25C - 0-6m - 4-20mA

Cód.ALPSGE-25C0-6

The SGE-25C probe are applicable for measuring liquid levels. A typical use for this probe is the measurement of wastewater liquid levels in intermediate pumping stations, fermentation chambers, settling tanks, etc.

€430.00

In stock

Product Description

The SGE-25C probe are applicable for measuring liquid levels. A typical use for this probe is the measurement of wastewater liquid levels in intermediate pumping stations, fermentation chambers, settling tanks, etc.

Principles of Operation
The probe measures liquid levels based on a simple relationship between the height of the liquid column and the resulting hydrostatic pressure. The pressure measurement is carried out at the level of the separator diaphragm of the immersed probe and is related to atmospheric pressure through a capillary in the cable.

The use of a special diaphragm separator minimizes the metrological effect of sediment deposits on the diaphragm surface. This allows the probe to have a longer useful life and proper use in contaminated media (even in the presence of abrasives such as sand). Easy cleaning with a gentle jet of running water (washing with water under pressure can damage the probe).

The active sensing element is a piezoresistive silicon sensor separated from the medium by an insulating diaphragm. The electronic amplifier, which works in combination with the sensor, and is intended to standardize the signal, is additionally equipped with an overvoltage protection circuit, which protects the probe from damage caused by interference induced by atmospheric discharges or current engineering. heavy associated appliances.

Characteristics
Range: 0 to 6 m
Output: 4-20 mA
Cable length: 10m
Fluids: water, wastewater

Specification

Characteristics
Range: 0 to 6 m
Output: 4-20 mA
Cable length: 10m
Fluids: water, wastewater

Documents