LOWARA e-HM 10 pump up to 14 m3/h

VER PREÇO / COMPRAR

The e-HM pump is a horizontal multistage centrifugal type, non-self-priming, for high pressures. The pumps are equipped with high-performance Lowara motors. Centrifugal pumps specially designed for increasing pressure in domestic water installations. High pressure water supply for domestic or industrial use, pressurization, irrigation, sprinkler systems, heating and air conditioning

Lowara
Product Name Price Delivery Qty
LOWARA pump 10HM03 P15M5HVBE, 230V
Cód.LOW104600880

€639.00

€505.00

LOWARA pump 10HM03P15T5RVBE, 400V
Cód.LOW104600380

€647.00

€511.00

LOWARA Pump 10HM04 P22T5RVBE, 400V
Cód.LOW104600390

€629.00

€497.00

LOWARA Pump 10HM05 P30T5RVBE, 400V
Cód.LOW104600400

€712.00

€563.00

LOWARA Pump 10HM06 P30T5RVBE, 400V
Cód.LOW104600410

€761.00

€601.00

Product Description

The new e-HM is a modern and robust pump What's new are: Low operating costs: Top hydraulics with the best efficiency, together with IE3 motors, represent the lowest operating costs on the market. Longer service intervals: Thicker pump body, high quality bearings and the use of stainless steel ensure a longer service interval. Low noise level: High-efficiency hydraulics, motor and thicker pump body reduce pump noise as much as possible.

Description
The e-HM pump is a horizontal multistage centrifugal type, non-self-priming, for high pressures. The pumps are equipped with high-performance Lowara motors. Centrifugal pumps specially designed for increasing pressure in domestic water installations. High pressure water supply for domestic or industrial use, pressurization, irrigation, sprinkler systems, heating and air conditioning

Operation
Fluid: Clean waters and non-aggressive or viscous liquids, free of solid substances.
Maximum suction height: 7 m

Constructive characteristics
Body: AISI 304 Stainless Steel
Impellers: Noryl
Diffusers: AISI 304 Stainless Steel
Outer housing: AISI 304 stainless steel
Motor shaft: AISI 304 stainless steel
Mechanical seal: Ceramic/Graphite

Electric Motor
Two-pole induction type, closed and self-ventilated, suitable for continuous operation, with IP55 degree of protection and class F insulation. Single-phase 230V - 50Hz with permanent capacitor or three-phase 400V - 50 Hz. Motors must be thermally protected by the user .

Connections
11/2" suction
11/4" compression

Specification

Connections
11/2" suction
11/4" compression

e-HM Série 10
Model I [A] P1 P2 Q
1~230V 3~230V 3~400V [kW] [kW] [HP] l/min 0 83 108 133 158 183 208 233
m3 /h0 5.0 6.5 8.0 9.5 11.0 12.5 14.0
H [m]
10HM03 P15M5HVBE 8.29 - - 1.88 1.50 2.00 46.2 40.9 38.6 36.2 33.4 30.1 25.8 20.6
10HM03 P15T5RVBE - 5.50 3.17 1.75 1.50 2.00 46.2 40.9 38.6 36.2 33.4 30.1 25.8 20.6
10HM04 P22T5RVBE - 7.58 4.38 2.35 2.20 3.00 61.2 55.7 52.7 49.6 46.2 42 36.7 30.3
10HM05 P30T5RVBE - 10.1 5.83 2.94 3.00 4.00 76.6 69.8 66.2 62.3 58 52.8 46.2 38.2
10HM06 P30T5RVBE - 11.2 6.45 3.47 3.00 4.00 91.7 83 78.5 73.8 68.5 62.2 54.3 44.6

Documents

For more information, see the Technical Data Sheet and User Manual

Partilhe