Coverco Submersible Motor

VER PREÇO / COMPRAR
Coverco
Product Name Price Delivery Qty
Engine "Coverco" 2500N 0.50CV 230V
Cód.56C005005

€300.45

€203.30

Engine "Coverco" 2500N 0.50CV 400V
Cód.56C010005

€309.45

€209.40

Engine "Coverco" 2500N 0.75CV 230V
Cód.56C005010

€302.60

€204.80

Engine "Coverco" 2500N 0.75CV 400V
Cód.56C010010

€320.15

€216.60

Engine "Coverco" 2500N 1.00CV 230V
Cód.56C005015

€327.65

€221.70

Engine "Coverco" 2500N 1.00CV 400V
Cód.56C010015

€340.35

€230.30

Engine "Coverco" 2500N 1.50CV 230V
Cód.56C005020

€356.70

€241.40

Engine "Coverco" 2500N 1.50CV 400V
Cód.56C010020

€384.05

€259.90

Engine "Coverco" 2500N 2.00CV 230V
Cód.56C005025

€407.40

€275.70

Engine "Coverco" 2500N 2.00CV 400V
Cód.56C010025

€407.80

€275.90

Engine "Coverco" 2500N 3.00CV 400V
Cód.56C010030

€481.65

€325.90

Engine "Coverco" 2500N 4.00CV 400V
Cód.56C010035

€652.15

€441.20

Engine "Coverco" 2500N 5.50CV 400V
Cód.56C010040

€824.15

€557.60

Engine "Coverco" 2500N 7.50CV 400V
Cód.56C010045

€936.75

€633.80

Engine "Coverco" 4500N 3.00CV 400V
Cód.56C010050

€699.65

€473.40

Engine "Coverco" 4500N 5.50CV 400V
Cód.56C010055

€895.25

€605.70

Engine "Coverco" 4500N 7.50CV 400V
Cód.56C010060

€1,055.35

€714.00

Engine "Coverco" 4500N 10.0CV 400V
Cód.56C010065

€1,239.10

€838.30

Product Description

The 4" submersible motors of the NBS4 series, the most recent from Coverco (Franklin Electric Group), are rewindable, like their predecessors and can work in artesian wells where the water temperature does not exceed 35 ºC and a pH between 6.5 and 8.0 The engine coolant is a dielectric fluid called white oil approved by the American FDA and other pharmacological institutes around the world.
The coupling and flange dimensions comply with NEMA regulations as these Coverco submersible motors were expressly designed to operate coupled to submersible pumps with the same coupling dimensions. The power supply can be single-phase or three-phase. The single-phase line ranges from 0.37kW to 4.0 kW, the three-phase ranges from 0.37 kW to 7.5 kW.
Coverco submersible motors are typically used in vertical applications. However, the motors can be installed horizontally, always and in any case, after prior confirmation by our technical department and analysis of the application in question.
Coverco submersible motors can be installed in 4" artesian holes with a maximum depth of 250 meters. Their ability to be rewindable is guaranteed by a design that facilitates disassembly and assembly.

applications
Coverco 4" submersible motors ensure reliable operation in boreholes with a diameter of 4" or larger. The axial and radial bearings are lubricated with oil that allows maintenance-free operation. Pressure compensation inside the engine is ensured by a special membrane.

Benefits
Stator in oil bath
Cable material complies with drinking water standards
Protection against sand and seal that allows excellent operation in the presence of sand inside the artesian hole.
Optimal efficiency at low operating costs
All engines are supplied ready to work and 100% tested

Specifications
0.37 – 7.5 kW
Flange : NEMA 4”
Protection : IP68
Number of starts per hour: max. 30
Operation: vertical
Nominal voltage: 210-220-230/50 Hz; 380-415V/50Hz, 460V/60Hz
Voltage Tolerance: ± 10%
Motor protection: choose thermal relay according to EN 60947-4-1 standards, tripping class 10 or 10A, tripping time < 10 s. at 5 x IN
Insulation: Class F
Ambient temperature: 30°C
Cable measurements: 4 x 1.5 mm2
Minimum cooling flow: 8 cm/sec.
pH water: 6.5-8

Specification

Documents

For more information, see the Technical Data Sheet and Catalog .

Partilhe