Astral Victoria Plus Pool Pump

VER PREÇO / COMPRAR
AstralPool
Product Name Price Delivery
Pump Victoria Plus, 0.75CV, 230V
Cód.ASTR38771

€554.73

€333.00

Pump Victoria Plus, 0.75CV, 400V
Cód.ASTR38772

€554.73

€333.00

Pump Victoria Plus, 1.00CV, 230V
Cód.ASTR38773

€571.95

€344.00

Pump Victoria Plus, 1.00CV, 400V
Cód.ASTR38774

€571.95

€344.00

Pump Victoria Plus, 1.50CV, 230V
Cód.ASTR38775

€643.29

€386.00

Pump Victoria Plus, 1.50CV, 400V
Cód.ASTR38776

€643.29

€386.00

Pump Victoria Plus, 2.00CV, 230V
Cód.ASTR38777

€660.51

€397.00

Pump Victoria Plus, 2.00CV, 400V
Cód.ASTR38778

€660.51

€397.00

Pump Victoria Plus, 3.00CV, 400V
Cód.ASTR38780

€708.48

€426.00

Product Description

AstralPool range of high performance pumps.

The Victoria Plus pump has a sober and robust design, with low-noise operation due to the rubber supports on which it rests. New generation pre-filter cap nut, easy to handle.

IP-55 protection motor.
Large capacity pre-filter basket.
Available in models from 1/2 HP to 3 HP, with single-phase or three-phase motors.
Single-phase: 230 V II (common in domestic electrical installations) / Three-phase: 230/400 V III. If you are unsure, check with your electrician.

The Victoria Plus generation of pool pumps arises from the fusion of the Astral Victoria and Sprint pumps. With this range AstralPool offers a high performance pump where its construction, using technical plastics and top quality stainless steel, guarantees high performance.

It is a monobloc centrifugal pump with automatic suction capacity with single-phase or three-phase motors ranging from 1/2 HP to 3 HP. The new generation of motors in the Victoria Plus range allows working with a voltage range of +/- 10% in relation to the nominal motor, that is, in the event of a rise and fall of any voltage up to a maximum of 10%, the electric pump will operate normally.

All pump parts are made of technical plastic, thus avoiding any corrosion problems.
The diffuser body is made of Luranyl® and the impeller is made of Noryl® with fiberglass filling, giving them resistance and finishing at the highest level.
Mechanical seal in AISI-316 stainless steel and silicon carbide.
Class F insulation and IP-55 motor protection.
Bearings protected against the effects of humidity.
Self-priming up to 2 meters.
Large capacity pre-filter.

Specification

 

VOLUME CIRCULATION FILTRATION Ø FILTER BOMB
30 m³ 8 am 50 m³/h/m² 300mm. 0.33 HP
40-50 m³ 8 am 50 m³/h/m² 400mm. 0.50 HP
70-80 m³ 8 am 50 m³/h/m² 500mm. 0.50 HP
90-100 m³ 8 am 50 m³/h/m² 600mm. 0.75 HP
100-140 m³ 8 am 50 m³/h/m² 750mm. 1 HP
140-170 m³ 8 am 50 m³/h/m² 800mm. 1.50 HP
170-200 m³ 8 am 50 m³/h/m² 900mm. 2HP

Documents

For more information, see the Technical Data Sheet

Partilhe