Baico Lascar HS Automatic Water Pumps

Pressure groups with automatic electronic start and stop control   and protection against water shortage, silent and maintenance-free. Pressurization for domestic use in houses, apartments, etc.

Integrated dry-running protection. IP 55 protection . Automatic operation with start at 1,5 Bar and stop at the maximum pressure reached by the pump.

It has a small accumulation to prevent cyclical starting and stopping in the event of any water loss in the installation. If there is no water at the pump inlet, it stops automatically.

Silent multistage horizontal centrifugal pump , ideal for domestic pressurization and garden irrigation. Manufactured with reinforced materials for long life. Pump designed to work with an ON/OFF pressure controller or via a frequency inverter for fully automatic operation as a pressure group. Manufactured with robust components and corrosion-resistant materials, pump shaft and impellers in AISI 304 stainless steel, PPO diffusers. Pumps designed for supplying water under pressure to houses, apartments, for watering gardens, washing cars, filling tanks, etc.

Operation

• Fluid - Clean water and non-aggressive, non-viscous liquids, free of solid substances.
• Maximum fluid temperature - 40 ºC .
• Maximum suction height - 8 m .

Construction features

• Suction body - Cast iron.
• Push body - Cast iron.
• Impellers - AISI 304 stainless steel.
• Diffusers - PPO .
• Outer casing - AISI 304 stainless steel.
• Motor shaft - AISI 420 stainless steel.
• Mechanical seal - Ceramic/Graphite.

Electric Motor

Two-pole induction type, closed and self-ventilated, suitable for continuous operation, with protection level IX55 and class F insulation. Single-phase 230V - 50Hz with permanent capacitor or three-phase 400V - 50 Hz . Motors must be thermally protected by the user.

Links

• Aspiration - 1" ;
• Compression - 1" .

Flow Controller

Compact device for automatic control and protection of electric pumps. The patented system is equipped with special electronic flow and pressure sensors integrated into the electronic circuit that controls the operation of the electric pump and maintains constant pressure and flow, and has a safety system against dry running. COPRES K02   replaces the traditional autoclave, pressure switch, check valve and level switch system. This device automatically turns on the electric pump when any water point is opened and stops it after a 10-15 second delay as soon as there is no more water consumption.

Electric Motor

Two-pole induction type, closed and self-ventilated, suitable for continuous operation, with IP55 protection rating and class F insulation. Single-phase 230V - 50Hz with permanent capacitor. Motors must be thermally protected by the user.

- *The components of this kit are supplied in separate packaging! -