Speed Variator for SPEEDBOARD Pumps

VER PREÇO / COMPRAR
Product Name Price Delivery Qty
Speed Board Speed Variator Model MT 1006 - 1~230V
Cód.18035960

€671.00

€546.00

Speed Board Speed Variator Model MT 1010 - 1~230V
Cód.18035965

€761.00

€619.00

Speed Board Speed Variator Model TT 1309 - 3~400V
Cód.18035970

€836.00

€680.00

Speed Board Speed Variator Model TT 1314 - 3~400V
Cód.18035980

€939.00

€763.41

Product Description

Speed variator for pumps SPEEDBOARD device for installation on the motor to control an electric pump with frequency variation.
We sell 2 models of controllers, one for single-phase electric pumps and the other for three-phase electric pumps. They can be assembled individually or in a group of two electric pumps communicating with each other, MASTER-SLAVE with alternating start order.

This system constantly modulates the speed of the electric pump and uses only the energy essential for this purpose. In addition to reducing energy consumption, it increases the durability of the electric pump, as its mechanics are not always subjected to maximum speed and do not produce shock effects. ram since the starts and stops are progressive.

This equipment stands out for its simplicity of programming and use, after connecting to the mains you only have to set the nominal pressure.

Characteristics
Frequency inverter for controlling the electric pump
Function ( Automatic Reset Test ). If the device stops due to the action of the dry running safety system, the device will automatically try to reset the system at a programmed periodicity to check whether the water level has been restored.
Automatic reset system after interruption of the electrical supply. The system restarts in the same state it had before the interruption, maintaining the configuration parameters.
4-20mA output for external pressure transducer.
External pressure transducer 0-10 bar included.
Control and information panel with LCD display.
Cooling by forced convection through the engine fan.
Aluminum heat sink.
Record of operational commands. Information on: operating hours, starts, electricity grid connection counter.
Alarm log. Information about the type and number of alarms generated since the device started.
Input for minimum water level switch. This system is independent of the electronic dry-running safety system.

Protections
Control and safety system against overcurrents
Electronic control and safety system against dry running of electric pumps due to lack of water.
Anomalous supply voltage.
Short circuit.

Specification

 

Technical Characteristics
Model 1006 MT 1010 MT 1309 TT 1314 TT
Supply voltage: ~1x230 Vac ~1x230 Vac ~3x400 Vac ~3x400 Vac
Frequency: 50/60Hz 50/60Hz 50/60Hz 50/60Hz
Exit: ~3x230 Vac ~3x230 Vac ~3x400 Vac ~3x400 Vac
Maximum current intensity:

6 A

10 A 9 A 14 A
Maximum peak current: 20% 10" 20% 10" 20% 10"   20% 10"
Protection index: IP 65 or maximum of the motor IP 65 or maximum of the motor IP 65 or maximum of the motor IP 65 or maximum of the motor
Adjustment range: 0.5 - 16 Bar 0.5 - 16 Bar 0.5 - 16 Bar 0.5 - 16 Bar
Maximum ambient temperature: 50ºC 50ºC 50ºC 50ºC
Cooling system: convection through the engine convection through the engine convection through the engine convection through the engine
Weight: 2.10 kg 2.10 kg 3.50 kg 3.50 kg


Features Control Panel

The control panel includes a multifunction LCD display, indication LEDs, START-STOP and AUTOMATIC switches and configuration system.

Documents

For more information, see the Technical Data Sheet

Videos

Partilhe