Salt Electrolysis Go Salt CTX

Inspired by nature, salt electrolysis systems produce chlorine from common salt dissolved in water. The salt necessary for its operation must be added at once to the pool in a concentration of 4-6 g/L (6 times lower than that of sea water) and similar to a saline or human tear.

CTX offers water treatment technology, featuring a full range of equipment to meet all needs. A disinfection system that improves water quality, avoiding the handling and storage of dangerous chemicals and simplifying pool maintenance, allowing the option of a safe and fully automatic treatment system.

Easy installation
Self-cleaning systems
The End of Itchy Eyes
The end of dry skin
Crystal clear, disinfected water at any time

Healthier Water
The only product added to the water is common salt
Water works as an antiseptic
Salinity similar to that of a tear (4-6 g/l)
Do not handle corrosive chemicals

Economy and Security
No dangerous chemicals are used. There is no risk of contamination with highly toxic products.
There is no need to store flammable products.
There is no electrical risk. work with the same voltage as a light bulb.

Respects the Environment
The salt remains in the water with self-regeneration cycles. Very low water renewal frequency as by-products do not accumulate.
90% of spending on chemical products is eliminated, only stabilizers (the first time) and pH lowerers are consumed.
The electrical consumption of the equipment is similar to that of a pump. (50 -200W)

Ideal for
Residential swimming pools

added value
Saline electrolysis systems generate chlorine from common salt dissolved in water.
The salt necessary for its operation must be added at once to the pool at a concentration of 4-6 gr/lt (6 times lower than sea water) and similar to saline.

Usage advice
Keep in mind that the salt concentration in the water is between 4-6 gr/Lt, and the alkalinity is between 60-120 ppm.
Chlorine production must be at a position that maintains adequate chlorine levels (0.5-1.5ppm).
You should never scrape or brush the cell or electrodes.
You should adjust the pH between 7.2-7.4 to optimize the treatment, and you can add a pump that automatically controls and regulates the pH.
In swimming pools with strong sunlight or intensive use, it is advisable to maintain a concentration of 20-30 ppm of stabilizer (isocyanuric acid), as it will be of great help in preventing the destruction of the free chlorine present in the water by the action of sunlight.
Check that, when the equipment is operating, the water flow through it is not closed.