Lutz Acid Transfer Pump, Polypropylene, MI-4 Engine

Cód.LUT0030-000+LUT0110-201+LUT0204-410

A trasfega de líquidos corrosivos ou tóxicos representam um desafio para a segurança das pessoas e do meio ambiente.



€1,395.26

€1,255.80

In stock

Product Description

The transfer of corrosive or toxic liquids represents a challenge for the safety of people and the environment. At Lutz you will find the ideal solution for your security. Lutz has developed a range of specific products for transferring this type of liquid, bombas tubulares for transferring and emptying drums and containers.

Any project requires concentration. Once the objective is well defined, tude becomes easier. Using the right tools, it becomes even faster. There are no more spills and waste and there is no harm to the environment and possible accidents. 80% of transfer jobs can be carried out with our most basic equipment, including neutral, aggressive or highly corrosive fluids. Using our guide you can easily choose the right pump for the job, depending on the fluid in question.

Exemplos de líquidos:

Battery acid, glycols, phosphoric acid, hydrochloric acid, oil-based lubricants, solvents, etc.

Características:
Speed variator allows controlled filling of liquids.
For use on drums and drums.
Wide range of applications thanks to a sealless construction.

Siatema de vedação:
Construction free of mechanical packing (SL)

Comprimento de imersão:
1000 mm

Aviso:
This pump não pode ser usada with flammable liquids.

Vantagens:
Variable speed for safe flow control.
Free of mechanical seal.
PTFE supports
easy maintenance
silent

Nota: The flow rate decreases proportionally with increasing fluid viscosidade . densidade also affects flow rate.

 

Specification

Modelo PP41 + MI4
Corpo Polipropileno
Empanque: Isenta
Emapanque mecânico:  Isenta
Casquilhos ETFE/PTFE
Veio: HC-4
Impulsor:  Polipropileno
Tipo de impulsor: R
Diâmetro tubo de imersão 41 mm
Temperatura ambiente máxima: 50 ºC
Ligações: Macho 11/4" - 19 mm
Comprimento do tubo imersão: 1000 mm
Caudal máximo (água a 20ºC) 160 l/m
Altura de elevação máxima (água a 20ºC): 8,5 m.c.a.
Viscosidade máxima: 300 cps
Densidade máxima: 1,1
Potência motor: 450-500 W
Tensão: 230 V
Frequência: 50 Hz

Documents

Para mais informação, consulte a Lista Peças Bomba