LEO AJm90 JET Automatic Water Pump 1.20CV, 230V

Self-priming centrifugal pump suitable for supplying water to domestic installations with stainless steel impeller. Equipped with an electronic device for automatic control and protection of the electric pump , this system is equipped with an electronic sensor integrated into the circuit that controls the starting and stopping of the electric pump and has a safety system against dry running . It replaces the traditional autoclave, pressure switch, check valve and level switch system.

This device automatically switches on the electric pump when any water point is opened and stops after a time delay of 15 to 20 seconds as soon as water consumption stops. Self-priming centrifugal pump with JET system , with high suction capacity. Suitable for domestic applications, pressure groups, garden watering, washing, etc

Self-priming centrifugal pump suitable for supplying water to domestic installations with aço inox impeller.
Very compact, silent and with great suction power.

Operation

• Nominal pressure - 3 Bar @ 55 l/m .
• Fluid - Clean water and non-aggressive, non-viscous liquids, free of solid substances.
• Maximum fluid temperature - 40 ºC .

• Maximum suction height - 8 m .

Construction features

• Pump body - Cast iron;
• Pump support - Cast iron;
• Turbine - Stainless Steel 304 ;
• Diffuser - Noryl ;
• Motor shaft - AISI 304 stainless steel;
• Mechanical seal - Ceramic/Graphite;

Electric Motor

Two-pole induction type, closed and self-ventilated, suitable for continuous operation, with IPX4 protection rating and class F insulation. Single-phase 230V - 50Hz with permanent capacitor. Motors must be thermally protected by the user.

Links

• Aspiration - 1" ;
• Compression - 1" ;

*The components of this kit are supplied in separate packaging.