Baico Lascar H Automatic Water Pumps

VER PREÇO / COMPRAR
Baico
Product Name Price Delivery Qty
Baico Lascar HS2-30M, Automatic, 0.75CV, 230V
Cód.BAILASCARH230MOPT
€169.00
Baico Lascar HS2-40M, Automatic, 1.00CV, 230V
Cód.BAILASCARH240MOPT
€194.00
Baico Lascar HS4-35M, Automatic, 1.00CV, 230V
Cód.BAILASCARH435MOPT
€211.00

Product Description

Biaco Lascar H Pump

Pressure groups with automatic electronic control of start and stop and protection against lack of water, silent and maintenance-free. Pressurization for domestic use in houses, apartments, etc. Starting pressure 1,5 Bar . Stopping pressure (the maximum pressure reached by the pump) .

  • Built-in check valve.
  • Supplied with pressure gauge.
  • Inlet and outlet diameter - 1” female and 1” male respectively.
  • Reset button.


Operation

Built-in dry-running protection. IP 55 protection . Automatic operation with start at 1,5 bar and stop at the maximum pressure reached by the pump. It has a small accumulation to prevent cyclical start and stop in the event of any water loss in the installation. If there is no water at the pump inlet, it stops automatically.

  • Fluid - Clean water and non-aggressive, non-viscous liquids, free of solid substances;
  • Maximum fluid temperature - 60 ºC ;
  • Maximum suction height - 8 m ;

Construction features

  • Pump Body - AISI 304 Stainless Steel.
  • Impeller - PPO .
  • Motor shaft - AISI 304 stainless steel.
  • Mechanical seal - Ceramic/Graphite.

Flow Controller

Compact device for automatic control and protection of electric pumps. The patented system is equipped with special electronic flow and pressure sensors integrated into the electronic circuit that controls the operation of the electric pump and maintains constant pressure and flow, and has a safety system against dry running. OPTIMATIC replaces the traditional system of autoclave, pressure switch, check valve and level switch. This device automatically starts the electric pump when any water point is opened and stops it after a 10 second time delay as soon as there is no more water consumption.


Electric Motor

Two-pole induction type, closed and self-ventilated, suitable for continuous operation, with IP55 protection rating and class F insulation. Single-phase 230V - 50Hz with permanent capacitor. Motors must be thermally protected by the user.

*The components of this kit are supplied in separate packaging.

Specification

Model V P1 [kW] P2 [HP] P2 [kW] I [A] μF l/min 5 15 25 35 50 60
m 3 /h 0.3 0.9 1.5 2.1 3 3.6
2-20M 1~230 0.75 0.5 0.37 4.2 20 - 37 35 30 26 17.5 7.5
2-30M 1~230 0.96 0.75 0.55 3.8 20 - 48 47 40 35 25 14
2-40M 1~230 1.38 1 0.75 4.3 30 - 58 56 53 49 35 20
Model V P1[kW] P2[HP] P2[kW] I[A] μF l/min 10 25 50 75 100 110
m 3 /h 0.6 1.5 3 4.5 6 6.6
4-35M 1~230 1.2 1 0.75 6.2 30 - 50 48 43 35 22 12

Partilhe