ESPA KIT02 Automatic Water Pump up to 3.9 m3/h

Horizontal multistage centrifugal pump , silent and with excellent performance, suitable for domestic applications, pressure groups and irrigation systems.

Equipped with an electronic device for automatic control and protection of the electric pump , this system is equipped with an electronic sensor integrated into the circuit that controls the starting and stopping of the electric pump and has a safety system against dry running .

It replaces the traditional autoclave, pressure switch, check valve and level switch system. This device automatically switches on the electric pump when any water point is opened and stops after a time delay of 15 to 20 seconds as soon as there is no more water consumption.

Very compact, silent and with great suction power.

Operation

• Fluid - Clean water and non-aggressive, non-viscous liquids, free of solid substances.
• Maximum fluid temperature - 40 ºC ;
• Maximum suction height - 7 m ;

Construction Features

• Suction body - Cast iron with cataphoresis treatment.
• Push body - Cast iron with cataphoresis treatment.
• Impellers - AISI 304 stainless steel.
• Diffusers - Technopolymer.
• Outer casing - AISI 304 stainless steel.
• Motor shaft - AISI 431 stainless steel.
• Mechanical seal - Ceramic/Graphite.

Electric Motor

Two-pole induction type, closed and self-ventilated, suitable for continuous operation, with IPX5 protection rating and class F insulation. Single-phase 230V - 50Hz with permanent capacitor or three-phase 400V - 50 Hz . Motors must be thermally protected by the user.

Links

• Aspiration - 1" .
• Compression - 1" .

*The components of this kit are supplied in separate packaging.

Group composition

• #1 - ESPA electric pump model PRISMA ;
• #2 - Controlpump Controlpump Coelbo KIT 02 ;
  
• #3 - 1" Male Thread PVC Joint;