PressureWave Autoclave - Challeger GWS

PressureWave™ - Challenger vessels are ideally suited for a wide range of applications, including booster systems, thermal expansion, irrigation systems and water hammer absorption.

The PressureWave™ - Challenger series consists of a virgin polypropylene liner with an FDA certified high grade butyl diaphragm. This diaphragm is attached to the inner wall of the vessel by means of a steel ring. The bronze air valve, sealed with a screw-on O-ring cap, prevents air leakage. Water enters the vessel through a patented stainless steel connection. Both the diaphragm and the liner are reinforced in the areas of greatest wear, thus increasing the useful life of the tank. All internal parts, including the air valve, are rounded to prevent diaphragm puncture under extreme conditions. The water connection has a unique air/water seal that provides the vessel with total airtightness and makes any type of maintenance unnecessary.

Externally, the almond-colored polyurethane paint finish over an epoxy base coat provides hundreds of hours of protection against UV rays and sea spray.

PressureWave™ Autoclaves undergo extensive quality testing at every stage of the production chain to ensure the structural integrity of every vessel manufactured. PressureWave™ Vessels represent the best investment option and are the best pressure vessels currently available on the market.

FEATURES

Designed with a single fixed diaphragm.
Certifications: NSF standard 61 , CE/PED , WRAS , ACS , ISO- 9001 and Gost .
Patented 1" stainless steel water connection.
Virgin polypropylene liner.
Finished with polyurethane paint on an epóxi base.
Air valve cover with leak-proof O-ring seal.
Exhaustive quality testing at all stages of production.
They do not require maintenance.

• Maximum working pressure - 10 bar ;
• Maximum working temperature - 90ºC ;
• Factory pre-charge - 3,2 bar (60 - 150 liters ) .
• All connections are stainless steel.