Astral Victoria Plus Pool Pump

VER PREÇO / COMPRAR
AstralPool
Product Name Price Delivery
Pump Victoria Plus, 0.75CV, 230V
Cód.ASTR38771

€554.73

€333.00

Pump Victoria Plus, 0.75CV, 400V
Cód.ASTR38772

€554.73

€333.00

Pump Victoria Plus, 1.00CV, 230V
Cód.ASTR38773

€571.95

€344.00

Pump Victoria Plus, 1.00CV, 400V
Cód.ASTR38774

€571.95

€344.00

Pump Victoria Plus, 1.50CV, 230V
Cód.ASTR38775

€643.29

€386.00

Pump Victoria Plus, 1.50CV, 400V
Cód.ASTR38776

€643.29

€386.00

Pump Victoria Plus, 2.00CV, 230V
Cód.ASTR38777

€660.51

€397.00

Pump Victoria Plus, 2.00CV, 400V
Cód.ASTR38778

€660.51

€397.00

Pump Victoria Plus, 3.00CV, 400V
Cód.ASTR38780

€708.48

€426.00

Product Description

Victoria Plus Pool Pump

The Victoria Plus pump has a simple and robust design, with low-noise operation due to the rubber supports on which it rests. New generation pre-filter cap nut, easy to handle.


IP-55 protection motor

  • Large capacity pre-filter basket;
  • Available in 1/2 CV to 3 CV models, with single-phase or three-phase motors;
  • Single-phase - < II (usual in domestic electrical installations);
  • Three phase - 230/400 V III . If you are unsure, check with your electrician;

The Victoria Plus generation of pool pumps is the result of the merger of the Astral Victoria and Sprint pumps. With this range, AstralPool offers a high-performance pump whose construction, using technical plastics and top-quality stainless steel, guarantees high performance.

It is a monobloc centrifugal pump with self-priming capacity with single-phase or three-phase motors ranging from 1/2 CV to 3 CV . The new generation of motors in the Victoria Plus range allows it to work with a voltage range of +/- 10% compared to the nominal motor, i.e. in the event of a rise or fall in any voltage up to a maximum of 10% , the electric pump will operate normally.

  • All pump parts are made of technical plastic, thus avoiding any corrosion problems.
  • The diffuser body is made of Luranyl® and the impeller is made of Noryl® with a fiberglass filler, giving them resistance and a finish of the highest level.
  • Mechanical seal in AISI-316 stainless steel and silicon carbide.
  • classe F insulation and IP-55 motor protection.
  • Bearings protected against the effects of humidity.
  • Self-priming up to 2 meters.
  • Large capacity pre-filter.

Specification

 

VOLUME CIRCULATION FILTRATION Ø FILTER PUMP
30 m³ 8 h 50 m³/h/m² 300 mm 0.33 HP
40-50 m³ 8 h 50 m³/h/m² 400 mm 0.50 HP
70-80 m³ 8 h 50 m³/h/m² 500 mm 0.50 HP
90-100 m³ 8 h 50 m³/h/m² 600 mm 0.75 HP
100-140 m³ 8 h 50 m³/h/m² 750 mm 1 HP
140-170 m³ 8 h 50 m³/h/m² 800 mm 1.50 HP
170-200 m³ 8 h 50 m³/h/m² 900 mm 2 HP

Documents

For more information, see the Technical Data Sheet

Partilhe