EDS PW fixed membrane autoclave

EDS autoclaves with non-replaceable membrane are especially suitable for a wide range of applications, including booster systems , thermal expansion , irrigation systems and water hammer absorption (hydraulic shock) .

The EDS series with non-replaceable diaphragm consists of a virgin polypropylene liner with a WRAS -certified high-grade butyl diaphragm. This diaphragm is attached to the inner wall of the tank via a steel ring . The bronze air valve, sealed with a screw-on O-ring cap , prevents air leaks. Water enters the tank through a stainless steel connection. Both the diaphragm and liner are reinforced in the areas subject to the greatest wear, thus increasing the tank's service life.

All internal parts , including the air valve, are rounded to prevent diaphragm puncture under extreme conditions. The water connection features a unique air/water seal that provides the container with complete airtightness and eliminates the need for any maintenance .

Externally , the almond-colored polyurethane paint finish over an epoxy base coat provides hundreds of hours of protection against UV rays and sea spray.

EDS Autoclaves with non-replaceable membrane are subjected to several quality tests at all stages of the production chain to guarantee the structural integrity of all manufactured vessels.

FEATURES

• Designed with a single fixed diaphragm .
• Certifications - CE/PED 2014/68 EU, WRAS.
• 1" stainless steel water connection .
• Virgin polypropylene liner.
• Finished with polyurethane paint on an epoxy base.
• Air valve cover with leak-proof O-ring seal .
• Exhaustive quality testing at all stages of production.
• They do not require maintenance .

• Maximum working pressure - 10 Bar ;
• Maximum working temperature - 90 ºC ;
• Factory pre-charge - 2 bar ( 8 - 36 liters), 3 bar ( 60 - 200 liters).