InverFan 1 HP Mono Variable Speed Pump

Inverter Pool Pump - InverEco - AQUAGEM

The Variable Speed Pump is a model with an intelligent speed variator with an easy-to-use panel that allows you to read your consumption. In addition, the pump operates between 30% ~ 100% and comes with a one-click backwash, allowing it to operate at 100% of the pump's capacity.

Variable speed drives are the new generation of inverters coupled to the motor, specially designed to control and protect pumping systems based on the speed variation of the electric pumps , ensuring energy savings due to speed control, smooth starting and stopping, and system durability and reliability.

Energy Saving - Engine Speed

The higher the frequency (Hz) , the higher the engine rotation speed (rpm) .

In 2 pole motors the rotation is approximately [frequency x 60]:

• 30 Hz ~ 1800 rpm ;
• 40 Hz ~ 2400 rpm ;
• 50 Hz ~ 3000 rpm ;

The flow rate is proportional to the speed.
Pressure is proportional to the square of velocity.
Power is proportional to the cube of speed.

For example, if we reduce the speed by 30% , the new parameters will be:

• Flow rate ~ 70% of original.
• Head ~ 49% of original.
• Power ~ 34% of original.

Advantages

• Motor efficiency class - IE4 : For increased efficiency and to achieve extremely quiet performance.
• Soft Start - Starting from 0 amps to nominal amps that allow continuous operation.
• Optional external control - Digital input : To control the pump with more options.
• Noise - 36 dB .

Specific features

• Ambient temperature - Indoor installation, operating temperature: -10 ºC ~ 40 ºC .
• Water temperature - 5 ºC ~ 50 ºC .
• Salt concentration - up to 0,5 % , i.e. 5 g/l .
• Humidity - ≤90% RH, (20 ºC ± 2 ºC) .
• Altitude - Do not exceed 1000 m above sea level.
• Installation - The pump can be installed max. 2 m above the water level.
• Protection - Class F , IP55 .

Note: Possibility of backwashing, using a button, allowing the pump to operate at 100% capacity.